• As compact as standard Series 2 dial indicators.
• Large, easy-to-read LCD.
• GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
• The positive/negative count resulting from the spindle’s up/down movement can be toggled.
• Internal calculations using the simple formula of [F(x)=Ax)] are available
• Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
• The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading.
• With SPC data output.

Technical Data
Accuracy: Refer to the list of specifications.
Resolution: 0.01mm, 0.001mm, .0005″/0.01mm, .0001”/0.001mm or .00005”/0.001mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. Response speed: Unlimited
Measuring force: Refer to the list of specifications
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 5,000 hours under normal use
Dust/Water protection level: IP42 or IP53 (dust-proof type)

Function
Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm
conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
Internal calculations using the simple formula of [F(x)=Ax)] are available

Optional Accessories
905338: SPC cable (40” / 1m)
905409: SPC cable (80” / 2m)
64AAA016: SPC cable (3m)
64AAA017: SPC cab le (5m)
21EZA198: Spindle lifting lever (ISO/JIS type)*
21EZA199: Spindle lifting lever (ANSI/AGD type)*
21EZA105: Spindle lifting knob(12.7mm/5″ISO/JIS type)**
21EZA150:Spindle lifting knob(12.7mm/5″ ANSI/AGD type)**
21EZA197:Spindle lifting knob(25.4mm/1″,50.8/2″ models)
21EZA200:Spindle lifting knob(50.8mm/2″)
540774: Spindle lifting cable (stroke: 1”/25.4mm)
02ACA571: Auxiliary spindle spring for 25mm/1” models***
02ACA773: Auxiliary spindle spring for 50mm/2” models***
*Can be used on 12mm/.5” models only.
**Not available for low measuring force models.